az ru en

Products








DESCRIPTION:

Nitrocellulose based air drying, finishing bright varnish.

FEATURES:

Very good adhering to the applied surfaces, durable to physical and chemical influences, not loosing color finishing paint.

APPLICATION:

FAB CELLULOSIC BRIGHT PAINT (158) is easily used in furniture industry on metal and wood surfaces. New metal surfaces subject to be applied should be cleaned of mud, rust and oils then primed with FAB SYNTHETIC ANTIPAS (140) or FAB CELLULOSIC PRIMER. On wooden surfaces in order to get smooth surface it is needed to sand the surface lightly and apply FAB CELLULOSIC FILLING VARNISH (157). Sanding lightly once more apply FAB CELLULOSIC BRIGHT PAINT (158) mixing in 1:1 ratio with FAB CELLULOSIC THINNER (161) until getting homogeneous solution and apply with a pistol in 2-3 layers with interval of 20-30 minutes between each layer. Clean the used tools with FAB CELLULOSIC THINNER (161) immediately after use.

THINNING:

Should be thinned with FAB CELLULOSIC THINNER (161) in 1:1 ratio.

DRYING TIME:

(25°C/65%HR): Touch dry: 30-40 minutes.

FLASH RATE:

<23° C.

CONSUMPTION:

If applied in one coat 1 liter of FAB CELLULOSIC BRIGHT PAINT (158) can cover 10-12 m2 area (30-35 µm of dry film).

NOTE:

During the application the surface temperature should be between +15°C and +35°C. The temperature of the varnish itself shouldn't be lower than +12°C. When used indoors the space humidity should be no more than 65%.

SHELF LIFE:

2 years (in an unopened original box in cool, safe from freezing and direct influence of the sun rays).

WARNING:

R10 easily flammable. R20/21/22/25/36 - smelling, swallowing, contact with skin and eyes or breathing is harmful to health. R 42/43 Can cause allergic reaction if breathed or contacted with skin.

SAFETY MEASURES:

S 2 Keep far from children. S 3/7/9 Keep in cool and well-ventilated places in closed container. S 16 Keep away from the sources of fire; don't smoke while applying. S 23/24/25/29 Do not swallow vapor. Do not contact with skin and eyes. Do not pour to sewage. S 37/39 Wear proper protecting glasses and gloves while applying. S 45/46 If you feel bad in cases of accident or if swallowed immediately call for a doctor and show him the box or label. S 51 Should be used in good ventilated places.

PROBLEMS OCCURING WHILE KEEPING AND USING:

It is necessary to set the correct air in the compressor in order to avoid dampness in it. In the output of the compressor there must be an air stipulator, otherwise there may be holes in the paint. At the same time if the pressure is high or if applied in very close distance to the surface holes can be formed on the surface. The excessive thick layers or the excessive use of the thinners can cause flowing and waving view. If the surface is too dirty the paint can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE.

Facebook Twitter