az ru en

Products








DESCRIPTION:

Acrylic copolymer emulsion based, matte looking, finishing decorative paint for interior walls.

FEATURES:

FAB PLASTIC (300) is non-cracking and non-flowing interior paint with high adhesion ability. It has a high ability to breathe. There is no smell because it is water-based and environment-friendly.

APPLICATION:

FAB PLASTIC (300) is used as a finishing paint on interior walls and ceilings of buildings, on the surfaces previously painted and lost their color, on the surfaces with pasted sub-surface preparation, paintable wallpapers. The surfaces prior to the application should be cleaned of dust, dirt and oils, roughnesses should be smoothed and the surface should be dry. Cement based and plastered internal walls being painted for the first time should be sanded with emery paper to clean the rest of the sand grains and treated with FAB BINDER (340) mixed with water in 1:7 ratio. Wait 4 hours and apply FAB AKRİLİK MƏCUN (350). After the wall has completely dried it should be sanded and wiped with a damp cloth. One more time wash the surface with FAB BINDER (340) mixed with water in 1:7 ratios. Wait 4 hours after washing. Apply FAB PLASTIC (300) mixed with water to 20-30% for the first coat, and 10-20% for the second one with brush or roller. Wait 2 hours between coats. If needed the third coat can be applied the same way as the second one. If before or after the application there appeared salinization the surface should be cleaned with automobile brush and then treated with FABKIM HIDROSTOP 500 mixed with the same ratio of water.

THINNING:

20-30% of water for one coat, 10-20% - for the second.

DRYING TIME:

25°C/65%HR: dries within 1 hour, full drying – 24 hours.

CONSUMPTION:

Depending on the smoothness and absorption of the surface 1kg. of FAB PLASTIC (300) can cover 8-9 m2 of area in 1 coat.

NOTE:

During the application the surface temperature should be between +5°C and +30°C.

SHELF LIFE:

2 years. The ideal storage temperature is between +10°C and +20°C. (In an unopened original container in cool, safe from freezing and direct influence of the sun rays).

SAFETY MEASURES:

S 2 Keep far from children.
S 46 If swallowed immediately call for a doctor show him the box or label.

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment. Appearing of mold on the surfaces painted with water-based paints is caused by the excessive moisture around, by the exposure of the walls to water from outside, from ceiling and foundation and poor heating insulation. Light cracks appearing in application of acrylic paints are caused by the excessive thick coats of paint, by hot surface while painting, by windy weather, by adding filling agent such as calcite to the prepared paint and by the excessive use of grounds. The excessive application of paint to the surface or the excessive use of thinners can cause flowing and waving view. If the surface is too dirty the paint can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE.

Facebook Twitter