az ru en

Products


Paints

MEGA Paints

FAB MEGA ASTAR






Acrylic copolymer and silicone based, highly adhering and covering primer for interior and exterior surfaces

DESCRIPTION:

Acrylic copolymer and silicone based, highly adhering and covering primer for interior and exterior surfaces

FEATURES:

MEGAASTAR (438) odorless, ecological, environmental friendly. Resistant to atmospheric conditions. Reduces consumption of paint by creating a layer on the surface. It is recommended to use under bright emulsions MEGALÜKS (449) and MEGAİPƏK (441) in order to increase their brightness

APPLICATION:

The surfaces prior to the application should be dry, cleaned of dust, dirt and oils, roughness should be smoothed. Wait 4 weeks before painting the newly pasted surfaces. If before the application there appeared the salinization on the plastered surface it should be cleaned with damp automobile brush and then treated with FABKIM HIDROSTOP 500 mixed with the same ratio of water. Wait 24 hour after it. In order to get better result on plastered exterior surfaces they should be treated with FABBINDER (340) mixed with water in 1:7 ratios (1 ratio of FABBINDER (340), 7 ratios of water). Wait at least 5-6 hours after using FABBINDER (340) and apply FAB AKRILIK MƏCUN (350). After the wall has completely dried it should be sanded with sanding paper. In order to get better result on plastered interior surfaces they should be treated with FABBINDER (340) mixed with water in 1:7 ratios (1 ratio of FABBINDER (340), 7 ratios of water). Wait at least 5-6 hours after using FABBINDER (340). Non plastered interior surfaces should be plastered with plaster FABGIPS TƏK ASTAR. In order to get better result the surfaces treated with binder or plastered surfaces should be applied with stucco FABGIPS ASTAR and then covered with coating plaster FABGIPS ÜZLÜK. After the wall has completely dried it should be sanded with sanding paper. After being sanded the surface should be treated with FABBINDER (340) mixed with water in 1:7 ratios (1 ratio of FABBINDER (340), 7 ratios of water). Wait at least 5-6 hours after using FABBINDER (340). Mix MEGAASTAR (438) with water to 10% and apply with the help of DEKOR EXPORT RULO (1080), brush or pulverizing. Wash the tools with water after use

DRYING TIME:

Dries within 1 hour, can be covered with paint after 5-6 hours, full drying – 24 hours (25°C, 65%HR)

CONSUMPTION:

depending on the smoothness and absorption of the surface 1kg. of MEGAASTAR (438) can cover 8-10 m2 of area in 1 coat (at wet film thickness of 100-110µ, mixed with water to 10%)

NOTE:

During the application the surface and room temperature should be between +5°C and +30°C

SHELF LIFE:

2 years. The ideal storage temperature is between +10°C and +30°C. (In an unopened original container in cool, safe from freezing and direct influence of the sun rays)

SAFETY MEASURES:

S 2 Keep far from children. S 46 If swallowed immediately call for a doctor and show him the box or label

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder or hotter environment. The excessive thick coat of primer or the excessive use of thinners can cause flowing and waving look. If the surface is too dirty the primer can come unstuck and be stripped off. Light cracks appearing after the application of primer are caused by hot surface while priming and windy weather. The direct sun rays falling on the wall being primed can cause poor adhesion of the primer because of its fast drying. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE

Facebook Twitter