az ru en

Products


Other

FAB AKRİLİK MƏCUN







DESCRIPTION:

Acrylic copolymer emulsion based flexible surface correcting paste for exterior walls.

FEATURES:

FAB AKRİLİK MƏCUN (350) serves as filler used in filling of the gaps appearing while cleaning previously painted and swollen surfaces of exterior walls and removing existing roughnesses. Its flexibility helps to prevent appearing cracks on the finishing paint. Water and moisture resistant. Forms a very solid and flat surface. Provided that the appropriate primer is used after drying all types of finishing paints can be applied. Very low absorption helps to reduce the consumption of paint. Provides the respiration of surfaces. There is no smell because of its water base, environmental friendly.

APPLICATION:

FAB AKRİLİK MƏCUN (350) is used to create a flat surface on concrete and mineral plastered outer walls and old painted walls, and to fill gaps and cracks. The surfaces prior to the application should be cleaned of dust, dirt and oils, roughness should be smoothed and the surface should be dry. Wait 4 weeks before treating the newly plastered surfaces. Before applying FAB AKRİLİK MƏCUN (350) the surface should be washed with solution of FAB BINDER (340) mixed with water in 1:7 ratios (1 ratio of FAB BINDER (340), 7 ratios of water). Wait 5 hours and apply FAB AKRİLİK MƏCUN (350). It is ready to use. In order to get flatter surface use FAB AKRİLİK MƏCUN (350) with spatula in two coats. The second coat can be applied after the first coat has fully dried.

THINNING:

Ready to use.

DRYING TIME:

(20°C, 65%HR): Touch drying – 2-3 hours. Full drying – 24 hours. CONSUMPTION

CONSUMPTION:

Depending on the smoothness and absorption of the surface 1kg. of FAB AKRİLİK MƏCUN (350) can treat 0,5-1,5m2 of area in 1 coat. It is recommended to hold examples to define the exact consumption.

NOTE:

During the application the surface temperature should be between +10°C and +30°C.

SHELF LIFE:

2 years. The ideal storage temperature is between +10°C and +20°C. (In an unopened original container in cool, safe from freezing and direct influence of the sun rays).

SAFETY MEASURES:

S 2 Keep far from children. S 46 If swallowed immediately call for a doctor and show him the box or label.

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment. If the surface is too dirty the paint can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE.

Facebook Twitter