az ru en

Products


Paints

Road marking paint

FAB ROAD LINES PAINT







DESCRIPTION:

Short oil, alkyd-based road lines paint.

FEATURES:

Very high adhesive strength, quick drying. Resistant to corrosion.

APPLICATION:

FAB ROAD LINES PAINT (210) can be used in all kinds of road surfaces for road lines and marks. The best results are received on asphalt surfaces. As the adhesion will be poor it is not recommended to apply on aerated concrete. The surfaces must be cleaned and dried before application of FAB ROAD LINES PAINT (210). This paint should be applied with a special spray throwing tool or gun, brush or roller. Clean the tools with FAB CELLULOSIC THINNER (161) immediately after use.

THINNING:

Ready to use. If necessary it can be thinned with 5%-10% of FAB CELLULOSIC THINNER (161).

DRYING TIME:

(25C/65%HR): it is ready to use after 20-30 minutes at 25°C. Touch dry: 15 minutes, hardening: 4 hours.

FLASH RATE:

<23°C.

CONSUMPTION:

1 liter of FAB ROAD LINES PAINT (210) can cover ​​6-7 m2 area.

NOTE:

During the application the surface temperature should be more than +15°C.

SHELF LIFE:

18 months (in an unopened original box in cool, safe from freezing and direct influence of the sun rays).

WARNING:

R11 easily flammable. R36 - breathing harmful to health.

SAFETY MEASURES:

S 2 Keep far from children. S 3/7/9 Keep in cool and well-ventilated places in closed container. S 23 Do not breath vapours. S 24/25 Do not contact with skin and eyes. S 29 Do not throw to sewage. S 37/39 Wear a proper mask and gloves while working.

PROBLEMS OCCURING WHILE KEEPING AND USING:

If the surface is too dirty the paint can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE.

Facebook Twitter