az ru en



Acrylic copolymer based high quality, matt looking, silicone, washable finishing decorative paint for interior walls.


FAB SIL (309) is a high quality non-cracking and non-flowing, washable, silicone based interior paint with high adhesion power to all kinds of surfaces. It has a high ability to breathe. There is no smell because it is water-based and environmentally friendly.


FAB SIL (309) is used as a finishing paint on interior walls and ceilings of buildings, on the surfaces previously painted and lost their color, on the surfaces with pasted sub-surface preparation, paintable wallpapers. The surfaces prior to the application should be cleaned of dust, dirt and oils, roughness should be smoothed and the surface should be dry. Wait 4 weeks before painting the newly pasted surfaces. Cement based and plastered internal walls being painted for the first time should be sanded with emery paper to clean the rest of the sand grains.If before the application there appeared the salinization on the surface it should be cleaned with automobile brush and then treated with FABKIM HIDROSTOP 500 mixed with the same ratio of water. Wait 24 hours and apply FAB BINDER (340) mixed with water in 1:7 ratios (1 ratio of FAB BINDER (340), 7 ratios of water). Plasterboard surfaces must be treated the same way with FAB BINDER (340). Wait at least 5-6 hours and apply putty for interior repairs. After the wall has completely dried it should be sanded and wiped with a dry cloth. One more time wash the surface with FAB BINDER (340) mixed with water in 1:7 ratios. Wait at least 5-6 hours and apply with brush or roller FAB SIL (309) mixed with water to 25-30% for the first coat, and 15-20% for the second one. Wait at least 5-6 hours between coats. If needed the third coat can be applied the same way as the second one.


25-30% of water for one coat, 15-20% - for the second one.


(20°C/65%HR): Dries within 1 hour, full drying – 24 hours.


depending on the smoothness and absorption of the surface 1kg. of FAB SIL (309) can cover 6-9m2 of area in 1 coat. It is recommended to hold examples to define the exact consumption.


During the application the surface temperature should be between +10°C and +30°C.


2 years. The ideal storage temperature is between +10°C and +20°C. (In an unopened original container in cool, safe from freezing and direct influence of the sun rays).


S 2 Keep far from children.
S 46 If swallowed immediately call for a doctor and show him the box or label.


Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment. Appearing of mold on the surfaces painted with water-based paints is caused by the excessive moisture around, by the exposure of the walls to water from outside, from ceiling and foundation and poor heating insulation. Light cracks appearing in application of acrylic paints are caused by the excessive thick coats of paint, by hot surface while painting, by windy weather, by adding filling agent such as calcite to the prepared paint and by the excessive use of grounds. The excessive thick coat of paint or the excessive use of thinners can cause flowing and waving view. If the surface is too dirty the paint can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.


Facebook Twitter