az ru en



Acrylic copolymer emulsion based, matt looking, repeatedly washable, finishing decorative paint for interior walls.


FAB SUPER PLUS (304)is non-cracking and non-flowingwashable interior paint with high adhesion and covering power. It has a high ability to breathe. There is no smell because it is water-based and environment-friendly.


FAB SUPER PLUS (304) is used as a finishing paint on interior walls and ceilings of buildings, on the surfaces previously painted and lost their color, on the surfaces with pasted sub-surface preparation and paintable wallpapers. The surfaces prior to the application should be cleaned of dust, dirt and oils, roughness should be smoothed and the surface should be dry. Wait 4 weeks before painting the newly pasted surfaces. Cement based and plastered internal walls being painted for the first time should be sanded with emery paper to clean the rest of the sand grains. If before the application there appeared the salinization on the surface it should be cleaned with automobile brush and then treated with FABKIM HIDROSTOP 500 mixed with the same ratio of water. Wait 24 hours and apply FAB BINDER (340) mixed with water in 1:7 ratios (1 ratio ofFAB BINDER (340), 7 ratios of water). Plasterboard surfaces must be treated the same way with FAB BINDER (340).Wait at least 5-6 hours and applyputty for interior repairs.After the wall has completely dried (it can be sanded if needed) one more time wash the surface with FAB BINDER (340) mixed with water in 1:7 ratios. Wait at least 5-6 hours after washing. Apply with brush or rollerFAB SUPER PLUS (304)mixed with water to 20-25% for the first coat, and 10-15% for the second one. Wait at least 5-6 hours between coats. If needed the third coat can be applied the same way as the second one.


20-25% of water for one coat, 10-15% - for the second one.


(20°C/65%HR): dries within 1 hour, full drying – 24 hours.


Depending on the smoothness and absorption of the surface 1kg. of FAB SUPER PLUS (304)can cover 6-9 m2 of area in 1 coat. It is recommended to hold examples to define the exact consumption.


During the application the surface temperature should be between +10°C and +30°C.


2 years. The ideal storage temperature is between +10°C and +20°C. (In an unopened original container in cool, safe from freezing and direct influence of the sun rays).


S 2 Keep far from children. S 46 If swallowed immediately call for a doctor and show him the box or label.


Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment. Appearing of mold on the surfaces painted with water-based paints is caused by the excessive moisture around, by the exposure of the walls to water from outside, from ceiling and foundation and poor heating insulation. Light cracks appearing in application of acrylic paints are caused by the excessive thick coats of paint, by hot surface while painting, by windy weather, by adding filling agent such as calcite to the prepared paint and by the excessive use of grounds. The excessive thick coat of paint or the excessive use of thinners can cause flowing and waving view. If the surface is too dirty the paint can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.


Facebook Twitter