az ru en

Products








DESCRIPTION:

Silicone emulsion based, pigmented exterior wall primer with high adhesion power.

FEATURES:

FAB SILAN ASTAR (342) creates something like bridge between wall and paint and reduces the consumption. It has insulating and breathing features which help it to repel water and release the humidity out of the surface. It prevents the incorrect application of the finishing paint to the surface. It has a high ability to breathe. There is no smell because it is water-based and environmentally friendly. It is resistant to atmospheric conditions and sun rays.

APPLICATION:

FAB SILAN ASTAR (342) is recommended to use before finishing paints on mineral-based surfaces painted for the first time, on high absorbent new and previously painted surfaces. Surfaces prior to application should be cleaned of dust, dirt and oils, roughness should be smoothed and the surface should be dry. Cement based and plastered external walls being painted for the first time and the surfaces previously being painted with synthetic paints should be sanded with emery paper and cleaned of sand grains. Then apply with roller or spraying one coat of FAB SILAN ASTAR (342) mixed with water to 10%. Clean the tools with water after use.

THINNING:

Maximum 10% of water.

DRYING TIME:

(20°C/65%HR): 6-12 hours later finishing paint can be applied.

CONSUMPTION:

Depending on the smoothness and absorption of the surface 1lt. of FABSILAN ASTAR (342) can cover 7-11m2 of area. It is recommended to hold examples to define the exact consumption.

NOTE:

During the application the surface temperature should be between +10°C and +30°C.

SHELF LIFE:

2 years. The ideal storage temperature is between +10°C and +20°C. (In an unopened original container in cool, safe from freezing and direct influence of the sun rays).

SAFETY MEASURES:

S 2 Keep far from children. S 46 If swallowed immediately call for a doctor and show him the box or label.

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment. The excessive thick coats of paint or the excessive use of thinners can cause flowing and waving view. If the surface is too dirty the paint can come unstuck and be stripped off. If the surface is hot or the weather is windy while applying there can appear small cracks on the wall. If the paint is applied under the direct sun lights the adhesion power will be poorer. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE.

Facebook Twitter