az ru en



Acrylic copolymer based, matt looking, resistant to humidity and water, finishing decorative paint with high adhesion power for exterior walls.


FAB TEKSTUR (332) is non-cracking and non-flowing exterior wall paint with high adhesion power to all kinds of surfaces. It has a high ability to breathe. There is no smell because it is water-based and environmentally friendly.


FAB TEKSTUR (332) is used as a finishing paint on exterior walls of buildings, on the surfaces previously painted and lost their color and on the surfaces with pasted sub-surface preparation. The surfaces prior to the application should be cleaned of dust, dirt and oils, roughness should be smoothed and the surface should be dry. Wait 4 weeks before painting the newly pasted surfaces. Cement based and plastered internal walls being painted for the first time should be sanded with emery paper to clean the rest of the sand grains. If before the application there appeared the salinization on the surface it should be cleaned with automobile brush and then treated with FABKIM HIDROSTOP 500 mixed with the same ratio of water. Wait 24 hours and apply FAB BINDER (340) mixed with water in 1:7 ratios (1 ratio of FAB BINDER (340), 7 ratios of water). Wait at least 5-6 hours and apply FAB ACRYLYC PASTE (350). After the wall has completely dried (it can be sanded if needed), wash the surface once again with FAB BINDER (340) mixed with water in 1:7 ratios. Wait at least 5-6 hours and apply 1 coat of FAB TEKSTUR (332) with especial roller intended for making various textures. To get various patterns various rollers can be used also. FAB TEKSTUR (332) is ready to use. It can lose its texture if added water. Protect the surface from freezing and rain; do not apply under direct sun rays and in windy weather.


Ready to use.


(20°C/65%HR): dries within 1 hour, full drying – 24 hours. 24 hours later it gets resistance to changing weather conditions.


Depending on the smoothness and absorption of the surface 1kg. of FAB TEKSTUR (332) can cover 1-2m2 of area. It is recommended to hold examples to define the exact consumption.


During the application the surface temperature should be between +10°C and +30°C.


2 years. The ideal storage temperature is between +10°C and +20°C. (In an unopened original container in cool place, safe from freezing and direct influence of the sun rays).


S 2 Keep far from children. S 46 If swallowed immediately call for a doctor and show him the box or label.


Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment. Appearing of mold on the surfaces painted with water-based paints is caused by the excessive moisture around, by the exposure of the walls to water from outside, from ceiling and foundation and poor heating insulation. Light cracks appearing in application of acrylic paints are caused by the excessive thick coats of paint, by hot surface while painting, by windy weather, by adding filling agent such as calcite to the prepared paint and by the excessive use of grounds. If the surface is too dirty the paint can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.


Facebook Twitter