az ru en

Products


Paints

Synthetic paints

Sinthetic varnishes

FAB SYNTHETIC YAT VARNISH







DESCRIPTION:

Single-component, easy to apply, urethane alkyd binder based varnish with superior properties.

FEATURES:

Resistant to bumps, sea water, sun and rain and other external influences. Long-lasting brightness, transparency, flexibility, keeping a natural appearance of the surface, not getting yellow color, high filling power are of superior features.

APPLICATION:

On the wooden parts of sea means and on the exterior and interior wooden parts of buildings and on furniture. FAB SYNTHETIC YAT VARNISH (152) protects surface against such substances as oil, tea, coffee and soft drinks. Resistant to cleaning substances used in welfare. Brush, roll or guns can be used. In order to get good results the surfaces must be clean and dry. The surface should be sanded to smoothness and in order to protect it against potential wood worms it should be covered with FAB MOBITEX (182). After lightly sanding the surface once more, mix 1 liter of FAB SYNTHETIC YAT VARNISH (152) with 100-150 ml of FAB SYNTHETIC THINNER (160) and apply in 2-3 coats waiting 24 hours between each. To increase adhesion between coats and to get a smooth surface light sanding is recommended. FAB SYNTHETIC YAT VARNISH (152) gets its physical and chemical stability in 4 days. Clean the used tools with FAB SYNTHETIC THINNER (160) immediately after use.

THINNING:

Should be thinned with 10%-15% of FAB SYNTHETIC THINNER (160).

DRYING TIME:

(25°C/65%HR): touch dry: 2-3 hours, hardening: 24 hours; gets physical and chemical durability in 4 days.

FLASH RATE:

38°C.

CONSUMPTION:

1 liter of FAB SYNTHETIC YAT VARNISH (152) can cover ​​17-18m2 in one layer (30µm of dry varnish film thickness).

NOTE:

During the application the surface temperature should be between +5°C and +30°C.

SHELF LIFE:

2 years (in an unopened original box in cool, safe from freezing and direct influence of the sun rays).

WARNING:

R10 easily flammable. R20/21/22 - smelling, swallowing, contact with skin and eyes is harmful to health.

SAFETY MEASURES:

S 2 Keep far from children. S 3/7/9 Keep in cool and well-ventilated places in closed container. S 16 Keep away from the sources of fire; don't smoke while applying. S 45/46 If you feel bad in cases of accident or if swallowed immediately call for a doctor show him the box or label. S 51 Should be used in good ventilated places.

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment (appropriate storage temp. 20°C). A weak dispersion process while applying can cause appearing of orange peel layer on the surface. If applied in cold or damp weather conditions it can get a milky or matt look. The thicker layers of the varnish, bad weather conditions, the excessive solvent vapors around, applying the second layer before the first one has dried when the varnish dries with oxidation on air because of the faster drying of the upper layer the surface can be spoiled and wrinkles can appear. The excessive thick layers or the excessive use of the thinners can cause flowing and waving view. If used improper thinner the surface can be blurred and gelled. Not thinning enough can cause later drying of lower layers and the varnish can be stripped of. If the surface is too dirty or damp the varnish can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE.

Facebook Twitter