az ru en

Products


Paints

Synthetic paints

Sinthetic varnishes

FAB SYNTHETIC GLOSSY PARQUET VARNISH







DESCRIPTION:

Urethane alkyd binder based, single component, modified, easy to apply shiny parquet floor varnish.

FEATURES:

High and long-lasting brightness, durability to scratches, transparency and hardness, keeping natural view of applied surfaces, not getting yellow color are of superior features. Durable to cleaning agents used in welfare. Protects parquet floors, tiles and mosaics against such substances as oil, tea, coffee and soft drinks.

APPLICATION:

FAB SYNTHETIC GLOSSY PARQUET VARNISH (150) is used for the protection of various types of wood, parquet, tiles and mosaics from chemical and physical influences. To get good results the surfaces subject to be varnished must be clean and dry. The parquets should be sanded to smoothness, the holes and cracks should be filled with a mixture of chip breaks and varnish or repair putty LION. Top layer of mosaics and wooden tiles should be cleaned thoroughly of wax coating. It is recommended to use FAB MOBİTEX (182) to protect the surface against wood worms that may arise in the future. After light sanding to get proper surface FAB CELLULOSIC FILLING VARNISH (157) should be used. Sand the surface lightly once more and mixing 1L of varnish with 100-150 ml. of FAB SYNTHETIC THINNER (160) apply FAB SYNTHETIC GLOSSY PARQUET VARNISH (150) in 2-3 layers with 24 hours interval between each layer. In order to increase adhesion between coats light sanding is recommended. FAB SYNTHETIC GLOSSY PARQUET VARNISH (150) gets the physical and chemical durability in 4 days. It is recommended to use only a brush because of the bubbles which can appear by using roller. Clean the used tools with FAB SYNTHETIC THINNER (160) immediately after use.

THINNING:

Should be thinned with 10%-15% of FAB SYNTHETIC THINNER (160).

DRYING TIME:

(25°C/65%HR): touch dry: 2-3 hours, hardening: 24 hours; gets physical and chemical durability in 4 days.

FLASH RATE:

38°C.

CONSUMPTION:

1 liter of FAB SYNTHETIC GLOSSY PARQUET VARNISH (150) can cover ​​17-18m2 in one layer (30µm of dry varnish film thickness).

NOTE:

During the application the surface temperature should be between +5°C and +30°C.

SHELF LIFE:

2 years (in an unopened original box in cool, safe from freezing and direct influence of the sun rays).

WARNING:

R10 easily flammable. R20/21 - smelling, swallowing is harmful to health.

SAFETY MEASURES:

S 2 Keep far from children. S 3/7/9 Keep in cool and well-ventilated places in closed container. S 16 Keep away from the sources of fire; don't smoke while applying. S 45/46 If you feel bad in cases of accident or if swallowed immediately call for a doctor show him the box or label. S 51 Should be used in good ventilated places.

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment (appropriate storage temp. 20°C). A weak dispersion process while applying can cause appearing of orange peel layer on the surface. If applied in cold or damp weather conditions it can get a milky or matt look. The thicker layers of the varnish, bad weather conditions, the excessive solvent vapors around, applying the second layer before the first one has dried when the varnish dries with oxidation on air because of the faster drying of the upper layer the surface can be spoiled and wrinkles can appear. The excessive thick layers or the excessive use of the thinners can cause flowing and waving view. If used improper thinner the surface can be blurred and gelled. Not thinning enough can cause later drying of lower layers and the varnish can be stripped of. If the surface is too dirty or damp the varnish can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE.

Facebook Twitter