az ru en

Products


Paints

Synthetic paints

Sinthetic topcoats

FAB SYNTHETIC VARNISH WOOD PROTECTOR







DESCRIPTION:

Binding urethane alkyd-based, high absorbent capacity, easy to apply, decorative glossy wood protector, coloring the wood surface without spoiling its original view.

FEATURES:

There is no need to use primer and varnish. Due to special additions it protects the surface against mold and blight, high-quality, transparent pigments protect the wood against ultraviolet lights, does not fade the colors. With the power of highly absorbent penetrates into the depth of the wood. Easily absorbed by wood, resistant to scratches and abrasion, due to micro porous structure helps wood to breath, there is no need to be cleared after the application. Increases resistance of the wood, provides a strong adhesion to the surface subject to be varnished and painted. It is used to extend the surface life.

APPLICATION:

Decorative wood protector which can be used with confidence in old or new, interior and exterior wood surfaces. I can be used also in wooden houses, windows, balconies, inner and outer doors, wooden poles, wooden cellars, wooden ceilings, lambire, home and garden furniture and other wood products. It should be mixed before use. For best results the surface to be applied must be clean and dry. Old painted surfaces should be cleaned completely. Newly applicable surfaces should be cleaned of wax and emery powder. Use brush, roll or pistol and apply in 2 coats with an interval of 8 hours. Sanding with thin sanding paper between coats is recommended. To enhance the effect and to protect the surface of wood worms' attack in future it is recommended to apply 1-2 coats of FAB MOBITEX WOOD PROTECTOR (182) first. If needed it is also possible to apply FAB SYNTHETIC BRIGHT PARQUET VARNISH (150) after applying FAB SYNTHETIC VARNISH WOOD PROTECTOR (180). Clean the used tools with FAB SYNTHETIC THINNER (160) immediately after use.

THINNING:

Ready to use.

DRYING TIME:

(25°C/65%HR): touch dry: 3-4 hours, hardening: 8-10 hours; gets physical and chemical durability in 4 days.

FLASH RATE:

36°C.

CONSUMPTION:

1 liter of FAB SYNTHETIC VARNISH WOOD PROTECTOR (180) can cover ​​6-12m2 in one layer (30µm of dry varnish film thickness).

NOTE:

During the application the surface temperature should be between +5°C and +30°C.

SHELF LIFE:

2 years (in an unopened original box in a cool place, safe from freezing and direct influence of the sun rays).

WARNING:

R10 easily flammable.
R20/21/22 - smelling, swallowing, contact with skin and eyes is harmful to health.

SAFETY MEASURES:

S 2 Keep far from children.
S 3/7/9 Keep in cool and well-ventilated places in closed container.
S 16 Keep away from the sources of fire; don't smoke while applying.
S 45/46 If you feel bad in cases of accident or if swallowed immediately call for a doctor show him the box or label.
S 51 Should be used in good ventilated places.

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment (appropriate storage temp. 20°C). A weak dispersion process while applying can cause appearing of orange peel layer on the surface. If applied in cold or damp weather conditions it can get a milky or matt look. The thicker layers of the varnish, bad weather conditions, the excessive solvent vapors around, applying the second layer before the first one has dried when the varnish dries with oxidation on air because of the faster drying of the upper layer the surface can be spoiled and wrinkles can appear. The excessive thick layers or the excessive use of the thinners can cause flowing and waving view. If used improper thinner the surface can be blurred and gelled. Not thinning enough can cause later drying of lower layers and the varnish can be stripped of. If the surface is too dirty or damp the varnish can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE.

Facebook Twitter