az ru en

Products








DESCRIPTION:

Alkyd binders based high featured, high quality decorative finishing paint.

FEATURES:

The most superior features are quick-drying, high covering power, easy applicability, not fading or loosing color, resistance to physical and chemical influences and etc.

APPLICATION:

FAB SYNTHETIC LUX (101) is used in interior and exterior parts of buildings, furniture, agriculture, and other similar vehicles, in all types of wood and metal surfaces. After cleaning the surface of dirt, rust and oils in order to avoid rustiness in the future the metal surfaces should be primed with FAB SYNTHETIC ANTIPAS (140). New wood surfaces should be primed with FAB MOBITEX (182) in order to avoid worms' attacks in the future. 1lt. of FAB SYNTHETIC LUX (101) should be thinned with 100-150 ml. of FAB SYNTHETIC THINNER (160) per liter of dye until it is homogeneous. It should be applied in two layers with the help of brush, roll or gun. Wait a day for the second layer. Clean the used tools with FAB SYNTHETIC THINNER (160) immediately after use.

THINNING:

FAB SYNTHETIC LUX (101) should be thinned with 10-15% of FAB SYNTHETIC THINNER (160).

DRYING TIME:

(25°C/65%HR): touch dry: 2-3 hours, powder dry: 3-4 hours, hardening: 24 hours.

FLASH RATE:

36°C.

CONSUMPTION:

1 liter FAB SYNTHETIC LUX (101) in one layer can cover ​​15-20 m2 of primed area, 10-15 m2 of non-primed area (25±5µm of dry paints film thickness). For more precise control of the consumption trial workings should be held.

NOTE:

During the application the surface temperature should be between +5°C and +30°C.

SHELF LIFE:

2 years (in an unopened original box in cool, safe from freezing and direct influence of the sun rays).

WARNING:

R10 easily flashable. R202122 - smelling, swallowing, contact with skin and eyes is harmful to health.

SAFETY MEASURES:

S 2 Keep far from children. S 3/7/9 Keep in cool and well-ventilated places in closed container. S 16 Keep away from the sources of fire; don't smoke while applying. S 45/46 If you feel bad in cases of accident or if swallowed immediately call for a doctor show him the box or label. S 51 Should be used in good ventilated places.

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment (appropriate storage temp. 20°C). A weak dispersion process while painting can cause appearing of orange peel layer on the surface. If applied in cold or damp weather conditions it can get a milky or mat look. The thicker layers of the paint, bad weather conditions, the excessive solvent vapors, applying the second layer before the first one has dried when the paint dries with oxidation on air because of the faster drying of the upper layer the surface can be spoiled and wrinkles can appear. The excessive thick layers or the excessive use of the thinners can cause flowing and waving view. If the surfaces are too dirty the paint can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE.

Facebook Twitter