az ru en

Products


Paints

Synthetic paints

Sinthetic primers

FAB SYNTHETIC ANTIPAS PAINT







DESCRIPTION:

Alkyd binder based high anti-rust powered synthetic primer.

FEATURES:

Quick-drying, high covering power, easy applicability with brush, wet, water, and salt water durability are of superb features.

APPLICATION:

FAB SYNTHETIC ANTIPAS (140) is used as anti-rust primer in interior and exterior surfaces of all kinds of metal. The surface is to be cleaned of rust with a wire brush or sand spraying. Clean the dust and oils from the surface with the help of FAB SYNTHETIC THINNER (160) and then apply FAB SYNTHETIC ANTIPAS (140) with brush, roller, or guns. FAB SYNTHETIC ANTIPAS (140) should be thinned with 100-150 ml. of FAB SYNTHETIC THINNER (160) per liter of dye until it is homogeneous. It should be applied in two layers with an interval of 8 hours. Sand slightly waiting 24 hours after the second layer. Then apply FAB SYNTHETIC GLOSSY (100), FAB SYNTHETIC LUX GLOSSY (101), FAB SYNTHETIC MATTE (120) or FAB SYNTHETIC SUPER MATTE (121) which will protect the surface from the problem of corrosion for a long time. Clean the used tools with FAB SYNTHETIC THINNER (160) immediately after use.

THINNING:

Should be thinned with 10%-15% of FAB SYNTHETIC THINNER (160).

DRYING TIME:

(25°C/65%HR): touch dry: 1 hour, powder dry: 3-4 hours, hardening: 8-12 hours.

FLASH RATE:

36°C.

CONSUMPTION:

Depending on the surface 1 liter of FAB SYNTHETIC ANTIPAS (140) can cover ​​12-14m2 (25±5µm of dry paints film thickness). For more precise control of the consumption trial workings should be held.

NOTE:

During the application the surface temperature should be between +5°C and +30°C.

SHELF LIFE:

2 years (in an unopened original box in cool, safe from freezing and direct influence of the sun rays).

WARNING:

R10 easily flammable. R20/21/22 - smelling, swallowing, contact with skin and eyes is harmful to health.

SAFETY MEASURES:

S 2 Keep far from children. S 3/7/9 Keep in cool and well-ventilated places in closed container. S 16 Keep away from the sources of fire; don't smoke while applying. S 45/46 If you feel bad in cases of accident or if swallowed immediately call for a doctor show him the box or label. S 51 Should be used in good ventilated places.

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment (appropriate storage temp. 20°C). A weak dispersion process while painting can cause appearing of orange peel layer on the surface. If applied in cold or damp weather conditions it can get a milky or mat look. The thicker layers of the paint, bad weather conditions, the excessive solvent vapors, applying the second layer before the first one has dried when the paint dries with oxidation on air because of the faster drying of the upper layer the surface can be spoiled and wrinkles can appear. The excessive thick layers or the excessive use of the thinners can cause flowing and waving view. If the surfaces are too dirty the paint can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you.

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE.

Facebook Twitter