az ru en

Products


Paints

MEGA Paints

FAB MEGA DOLĞU






CELLULOSIC FILLING VARNISH

DESCRIPTION:

Cellulose-based, fast air drying filling varnish

FEATURES:

Completely fills holes and gaps on all kinds of wood and MDF surfaces, prepares the ideal surface for finishing varnishes and paints, prevents the absorption of finishing coatings to wood, reducing consumption, it forms layers that can be easily sanded

APPLICATION:

In order to get good result before applying MEGADOLĞU (268) the surface should be cleaned of dust, dirt and oils and should be dry. The surface should be sanded to full smoothness; places which need repair should be filled with a mixture of chip breaks and varnish or repair putty LİON TAXTA MƏCUNU (355). It is recommended to use 1 or 2 coats (24 hours between each coat) of FAB MOBİTEX (182) to make wood long-lasting. 30 minutes after each coat clean unabsorbed residues with lint-free cloth and sand the surface if needed when it is fully dry. Clean the surface from sanding dusts. When the surface is ready mix 1 liter of MEGADOLĞU (268) with minimum 50% of FAB CELLULOSIC THINNER (161) and with help of DEKOR KADIFE RULO (1065), brush or pulverizing apply in 1 or 2 coats on the sanded surface. Wait about 1-2 hours between coats. Under normal terms the surface can be sanded in 2-3 hours. Clean the used tools with FAB CELLULOSIC THINNER (161) immediately after use

THINNING:

Thin with 50% of FAB CELLULOSIC THINNER (161)

DRYING TIME:

(25°C/65%HR): Pre-drying: 5-7 minutes. Touch dry: 20 minutes. After 2-3 hours the surface can be sanded

FLASH RATE:

<23° C

CONSUMPTION:

If applied in one coat 1 liter of MEGADOLĞU (268) can cover 10-12 m2 area (at coat thickness of 120-150µ of thinned to 50%)

NOTE:

During the application the surface temperature should be between +5°C and +30°C

SHELF LIFE:

2 years. The ideal storage temperature is between +10°C and +30°C (in an unopened original box in cool, safe from freezing and direct influence of the sun rays)

WARNING:

R10 easily flammable. R20/21/22- smelling, swallowing, contacting with skin and eyes is harmful to health

SAFETY MEASURES:

S 2 Keep far from children. S 3/7/9 Keep in cool and well-ventilated places in closed container. S 16 Keep away from the sources of fire; don't smoke while applying. S 23/24/25 Do not swallow vapors. Do not contact with skin and eyes. S 45/46 If you feel bad in cases of accident or if swallowed immediately call for a doctor show him the box or label. S 51 Should be used in good ventilated places

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment (recommended to store at +20°C). The excessive thick layers or the excessive use of the thinners can cause flowing and waving view. Also if the excessive thick coats are applied the filler can be stripped off because of the faster drying of the upper layer. If the surface is too dirty, greasy or damp the varnish can come unstuck and be stripped off. If you are having problems like this, please contact Technical Service with any problem which you are interested in and take a party number on the container with you

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE

Facebook Twitter