az ru en

Products







ADHESIVE FOR POOL TILES

DESCRIPTION:

Cement based elastic water and frost resistant ceramic tile adhesive.

APPLICATION AREA:

Internal, external wall and floors cement based screeds/render coats, concrete screeds mosaics or shelf leveling smashing. It is suitable for private, public and Olympic pools and wet areas. The surface should be free of dust, dirt oil and etc.

APPLICATION:

Mix 6-7 lt. of clean water with 25kg of powder (24-28%). Let the mortar rest for 5 minutes and the mix again before using. Pot life: 3 hours under normal conditions (20ºC substrate and ambient temperature). Open time: 30 minutes under normal conditions in substrate and ambient temperature 23ºC (+/-5ºC) and 50% humidity. The applying time can change depending on the place and surface temperature and humidity. Application: the ambient temperature should be around +5ºC and +35ºC. Spread FABKIM POOL over the surface, and then adjust the thickness with the suitable notched trowel. Place the tiles and then press them down smoothly then by using a rubber hammer place the tiles correctly on their places. Back battering should be done for the tiles exceeding 33x33sm on walls and floors. For the tiles exceeding 30x60sm. add FABKIM LATEX to the mixture. Before the applications of high porous surface apply FABKIM FILM as a primer. Grouting should be done at least 24 hours after fixing.

CONSUMPTION:

The values change according to site conditions. 1kg of powder per 1m2. Spreader U6 U9 E10 6x6x6 9x9x9 8x10x20 Single bonding 3-4 4-5 6-8 Double bonding 5-6 6-8 7-9

SHELF LIFE:

the values change according to site conditions. 1kg of powder per 1m2. Spreader U6 U9 E10 6x6x6 9x9x9 8x10x20 Single bonding 3-4 4-5 6-8 Double bonding 5-6 6-8 7-91 year if stored in dry conditions and in the original bags.

WARNING:

ATTENTION: do not work in hot and windy weather conditions at open air. Do not add extra water into the paste. For more information please refer to datasheet.

Facebook Twitter