az ru en

Products


Paints

MEGA Paints

FAB MEGA DEKOR






WALLPAPER PAINT

DESCRIPTION:

Acrylic based, matt looking, easily applicable, washable, high quality decorative wallpaper topcoat paint with high flexibility, high adhesion and covering power

FEATURES:

MEGADEKOR (442) flexible, non-cracking and non-flowing matt wallpaper paint with high adhesion power for any kind of paintable. The impact and scratch resistant. Can be used in every season. It has a high ability to breathe. Environmental clean, do not smell, environmental friendly

APPLICATION:

MEGADEKOR (442) is applied in two layers directly on the wallpaper 48 hours after it was affixed to the wall. The surfaces prior to the application should be cleaned of dust, dirt and oils, the surface should be dry. Mix MEGADEKOR (442) with water to 15-20% and apply with the help of DEKOR EXPORT RULO (1080), brush or pulverizing. Wait at least 7-8 hours between coats. Wash the tools with water after use

THINNING:

Mix with 15-20% of water

DRYING TIME:

(20°C/65%HR): dries within 1 hour, time between coats – 7-8 hours, full drying – 24 hours

CONSUMPTION:

depending on the pattern of the wallpaper and the thickness of the coat 1kg. of MEGADEKOR (442) can cover 8-10 m2 of area in 1 coat (at wet film thickness of100-120µ, mixed with water to 15-20%)

NOTE:

Pay attention to a proper fixation of the wallpaper on the wall and avoid appearing swollen parts

SHELF LIFE:

2 years. The ideal storage temperature is between +10°C and +30°C. (In an unopened original container in cool, safe from freezing and direct influence of the sun rays)

SAFETY MEASURES:

S 2 Keep far from children. S 46 If swallowed immediately call for a doctor and show him the box or label

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder or hotter environment. Appearing of mold on the surfaces painted with water-based paints is caused by the excessive moisture around, by the exposure of the walls to water from outside, from ceiling and foundation and poor heating insulation. When a wall takes a damp the paint can come unstuck from the wall together with wallpaper. Light cracks appearing in application of acrylic paints are caused by the excessive thick coats of paint, by hot surface while painting, by adding filling agent such as calcite to the prepared paint and by the excessive use of grounds. The excessive thick coat of paint or the excessive use of thinners can cause flowing and waving look. If the surface is too dirty or in case of insufficient thinning of paint it can come unstuck and be stripped off. The direct sun rays falling on the wall being painted can cause poor adhesion of the paint because of its fast drying. If you are having problems like this, please contact Technical Service with any problem which you are interested in and take a party number on the container with you

Facebook Twitter