az ru en

Products


Paints

MEGA Paints

FAB MEGA LAK






BRIGHT PARQUET VARNISH

DESCRIPTION:

specially modified urethane alkyd based, single component, easy to apply shiny parquet floor varnish

FEATURES:

High and long-lasting brightness, durability to scratches (except hard and heavy things), transparency and natural view, resistant to yellowing are of superior features. Protects parquet floors, tiles and mosaics against such substances as oil, tea, coffee, soft drinks and so on

APPLICATION:

MEGALAK is used for getting of better look and protection of various types of wood, parquet, tiles and mosaics from chemical and physical influences. To get good results the surfaces subject to be varnished must be cleaned of dust, dirt and oils and dry. The parquets should be sanded to smoothness, the holes and cracks should be filled with a mixture of chip breaks and varnish or repair putty LION TAXTA MƏCUNU (355). Top coats of mosaics and wooden tiles should be cleaned thoroughly of wax coating. It is recommended to use 1 or 2 coats (24 hours between each coat) of FAB MOBİTEX (182) to make wood long-lasting. 30 minutes after each coat clean unabsorbed residues with lint-free cloth and sand the surface if needed when it is fully dry. In order to get proper surface it is necessary to use FAB CELLULOSIC FILLING VARNISH . Sand the surface lightly once more and mixing MEGALAK with 20-30% of FAB SYNTHETIC THINNER apply in 2-3 layers with 24 hours interval between each layer. It is better to apply with DEKOR KADIFE RULO or with brush. MEGALAK gets physical and chemical resistance in 7 days. Clean the used tools with FAB SYNTHETIC THINNER immediately after use

THINNING:

Thin MEGALAK with 20-30% of FAB SYNTHETIC THINNER

DRYING TIME:

(25°C/65%HR): touch dry: 2-3 hours, hardening: 24 hours; gets physical and chemical durability in 4 days

FLASH RATE:

37°C

CONSUMPTION:

depending on thickness of the coat 1 liter of MEGALAK (267) can cover 10-12 m2 in one layer (at coat thickness of 100-130µ of thinned varnish)

NOTE:

During the application the surface temperature should be between +5°C and +30°C

SHELF LIFE:

2 years. The ideal storage temperature is between +10°C and +30°C. (In an unopened original box in cool, safe from freezing and direct influence of the sun rays)

WARNING:

R10 easily flammable. R20/21/22 - smelling, swallowing and contact with skin is harmful to health

SAFETY MEASURES:

S 2 Keep far from children. S 3/7/9 Keep in cool and well-ventilated places in closed container. S 16 Keep away from the sources of fire; don't smoke while applying. S 45/46 If you feel bad in cases of accident or if swallowed immediately call for a doctor show him the box or label. S 51 Should be used in good ventilated places

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage. If used improper thinner the surface can be blurred and gelled. Not thinning enough can cause later drying of lower layers and the varnish can be stripped of. A weak dispersion process while applying can cause appearing of orange peel layer on the surface. If applied in cold or damp weather conditions it can get a milky or matt look. The thicker layers of the varnish, bad weather conditions, the excessive solvent vapors around, applying the second layer before the first one has dried when the varnish dries with oxidation on air because of the faster drying of the upper layer the surface can be spoiled and wrinkles can appear. The excessive thick layers or the excessive use of the thinners can cause flowing and waving view. If the surface is too dirty or damp the varnish can come unstuck and be stripped off. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE

Facebook Twitter