az ru en

Products


Paints

MEGA Paints

MEGASƏDƏF






Acrylic copolymer based, repeatedly washable, breathable, bright looking, easily applicable, colored with pearl pigments high quality decorative interior topcoat paint with high adhesion power

DESCRIPTION:

Acrylic copolymer based, repeatedly washable, breathable, bright looking, easily applicable, colored with pearl pigments high quality decorative interior topcoat paint with high adhesion power

FEATURES:

MEGASƏDƏF (443) is high quality, repeatedly washable, non-cracking and non-flowing interior wall paint with the ability to adhere to all kinds of surfaces and forming decorative look on paintable wallpapers. Pearl paint has a feature to change its color depending on the composition of pigment, the color of the surface to be applied, the direction of light rays falling on it and number of layers applied. The impact and scratch resistant. Can be used in every season. It has a high ability to breathe. Environmental clean, do not smell, environmental friendly

APPLICATION:

MEGASƏDƏF (443) is used as a finishing decorative bright paint on interior surfaces of buildings, on the surfaces previously painted with synthetic and water based paints, on all kinds of plastered surfaces, paintable wallpapers. The surfaces prior to the application should be cleaned of dust, dirt and oils, roughness should be smoothed and the surface should be dry. Wait 4 weeks before painting the newly pasted surfaces. If before the application there appeared the salinization on the plastered surface it should be cleaned with damp automobile brush and then treated with FABKIM HIDROSTOP 500 mixed with the same ratio of water. 24 hours later the black plastered surfaces should be treated with FABBINDER (340) mixed with water in 1:7 ratios (1 ratio of FABBINDER (340), 7 ratios of water). Wait at least 5-6 hours after using FABBINDER (340). Non plastered surfaces should be plastered with plaster FABGIPS TƏK ASTAR. In order to get better result the surfaces treated with binder or plastered surfaces should be applied with stucco FABGIPS ASTAR and then covered with coating plaster FABGIPS ÜZLÜK. After the wall has completely dried it should be sanded with sanding paper. The surfaces previously painted with synthetic and water based paints should be sanded, parts needing repair (swollen parts, cracks, etc.) should be repaired with FABGIPS materials. After being sanded the surface should be treated with FABBINDER (340) mixed with water in 1:7 ratios (1 ratio of FABBINDER (340), 7 ratios of water). Wait at least 5-6 hours after using FABBINDER (340). In order to get a desired color of the pearl paint it is necessary applied with 1 or 2 layers of White or Black MEGASƏDƏF ASTAR (449) first. Wait at least 5-6 hours and mix MEGASƏDƏF (443) with water to 25% and depending on desired covering and color apply with the help of DEKOR EXPORT RULO (1080), DEKOR effect roll and brush in one direction or pulverizing. Wait at least 5-6 hours between coats. Wash the tools with water after use. Surfaces previously painted with synthetic paints should be sanded first, then after repairing the defected parts with FABGIPS materials they should be applied with 1 or 2 coats of FAB KEÇİD ASTARI (437). Then depending on desired effect the surface should be covered with 1 or 2 coats of White or Black MEGASƏDƏF ASTAR (449) mixed with water to maximum 10%. NOTE: Because of its pearly composition MEGASƏDƏF (443) should be carefully mixed before use. MEGASƏDƏF (443) should be applied to wallpaper directly without using any other paint or colorant

THINNING:

Mix with 25% of water

DRYING TIME:

Dries within 1 hour, time between coats – 5-6 hours, full drying – 24 hours (20°C/65%HR)

CONSUMPTION:

depending on the smoothness of the surface, thickness of the coat and roll type used 1kg. of MEGASƏDƏF (443) can cover 9-12 m2 of area in 1 coat (at wet film thickness of100-120µ, mixed with water to 25%)

NOTE:

During the application the surface and room temperature should be between +5°C and +30°C

SHELF LIFE:

2 years. The ideal storage temperature is between +10°C and +30°C. (In an unopened original container in cool, safe from freezing and direct influence of the sun rays)

SAFETY MEASURES:

S 2 Keep far from children. S 46 If swallowed immediately call for a doctor and show him the box or label

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage. Appearing of mold on the surfaces painted with water-based paints is caused by the excessive moisture around, by the exposure of the walls to water from outside, from ceiling and foundation and poor heating insulation. Light cracks appearing in application of pearl paints are caused by the excessive thick coats of paint, by hot surface while painting, by adding filling agent such as calcite to the prepared paint and by the excessive use of grounds. The excessive thick coat of pearl paint or the excessive use of thinners can cause flowing and waving look. If the surface is too dirty or in case of insufficient thinning of pearl paint it can come unstuck and be stripped off. The direct sun rays falling on the wall being painted with pearl paint can cause poor adhesion of the paint because of its fast drying. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you

THE MANUFACTURER IS NOT RESPONSIBLE FOR MISUSE

Facebook Twitter