az ru en

Products


Paints

MEGA Paints

FAB MEGA TUTKAL







DESCRIPTION:

Polyvinyl acetate (PVA) and water-based, suitable for general use, wood, paper, covering and gluing industry, homopolymer adhesive with high adhesion power

FEATURES:

MEGA TUTKAL is used in adhering of all types of wood, paper, cardboard, and also in furniture production. Creates transparent, solid and flexible coat after drying, non-molding, odorless adhesive with high adhesion power

APPLICATION:

The surface prior to the application of MEGA TUTKAL (759) should be cleaned of dust, dirt and oils. Be sure that the surface is dry. Apply excessive amount of adhesive to the surface, immediately clean the overflowing parts, wait a little and fix. After the adhesive has been applied wait no more than 5-10 minutes for sticking. Tightly close the cover after each use. The adhesive should be applied to the surface with brush. Do not use rusty tools. Tools can be cleaned with water after use

DRYING TIME:

Between 30 minutes and 2 hours depending on thickness of the coat and type of the surface. Full drying – 24 hours (20°C, 65%HR)

FLASH RATE:

Ready to use

CONSUMPTION:

150-250mg/m2 depending on the thickness and type of the surface

NOTE:

During the application the surface and the place temperature should be between +5°C and +30°C

SHELF LIFE:

2 years. The ideal storage temperature is between +10°C and +30°C. (In an unopened original container in cool, safe from freezing and direct influence of the sun rays)

SAFETY MEASURES:

R22 Swallowing is harmful for health. S 2 Keep far from children. S24/25 Avoid contact with skin and eyes. S 46 If swallowed immediately call for a doctor and show him the box or label

PROBLEMS OCCURING WHILE KEEPING AND USING:

Incrustation in closed container is caused by air leakage; sediment is caused by keeping in a colder environment. There can occur sticking problem on the previously varnished surfaces or surfaces covered with synthetic paints. The fixation will be poor if the surface or fixing object is not dry enough. Do not wait more than 10 minutes in order to fix applied object, as because of the drying of the adhesive the fixation will be poor. If you are having problems like this please contact Technical Service with any problem which you are interested in and take a party number on the container with you

Facebook Twitter